Please note force gauge is sold separately
The MultiTest-d has been designed as the ideal entry-level motorised test stand for
the most popular tensile and compression applications. Simple operation and rugged
construction make it ideal for production environments and R&D laboratories.
Combined with a Mecmesin force gauge and accessories, the MultiTest-d is an
affordable solution for tension and compression testing testing (e.g. crimps, plastics,
textiles, wire and a wide range of low to mid-range force applications).
- Rigid Aluminium Base
manufactured with a solid
build quality
- Speed Control digitally
controlled speed selection
- Emergency Stop Button for immediate test termination
- Manual/Single/Continuous
Cycle Mode Key
- Zero Key to reset the
displacement at the current
crosshead position
- Bidirectional Start/Stop
Key to manually initiate/stop
tension or compression
testing
- Easy-to-read LCD Screen
with digital display of
displacement and speed
- Anvil Plate adjustable to
accommodate a wide range
of fixtures and grips
- Gauges sold separately
Sales Literature
Warranty Information
| MultiTest-d | 0.5 | 1 | 2.5 |
|---|
|
Part Number | 810-201 |
805-022 | 810-102 |
| Rated capacity N kgf lbf | 500 50 110 | 1000 100 220 | 2500 250 550 |
| Number of ballscrews | 1 | 1 | 1 |
| Speed range mm/min | 1 -1000 | 1 -1000 | 1 -1000* |
| in/min | 0.04 -40 | 0.04 -40 | 0.04 -40 |
| Crosshead speed accuracy | ±0.1% of indicated speed | |
|
| Throat Depth** | 70.5mm (2.8”) | 70.5mm (2.8”) | 70.5mm (2.8”) |
| Vertical daylight | 1359mm (53.5”) | 1159mm (45.6”) | 590mm (23.2”) |
| Height | 1710mm (67.3”) | 1510mm (59.4”) | 941mm (37”) |
| Width | 290mm (11.4”) | 290mm (11.4”) | 290mm (11.4”) |
| Weight | 38kg (84lbs) | 36kg (79lbs) | 22kg (49lbs) |
| Maximum Power Requirements |
120 watts | 200 watts |
250 watts |
|
Voltage | 230V AC 50Hz or 110V AC
60Hz |
| DISPLACEMENT | | | |
|---|
| Crosshead travel*** | 1200mm (47.3”) | 1000mm (39.4”) | 500mm (19.7”) |
| Maximum headroom*** | 1230mm (48.4”) | 1030mm (40.6”) | 530mm (20.9”) |
| STANDARD LOAD MEASUREMENT OPTIONS |
| Force gauge and dovetail bracket |
| S-beam loadcell, tension block module and AFTI display |
* 2.5kN - recommended maximum speed = 750mm/min (30in/min) above 2000N
** measured to centre line of the force gauge
*** measured with a force
gauge and short extension rod fitted