Brechbuhler Scales, Inc. Nitro Assists in a System Overhaul with Two DD 1050i’s

Phase 1:

The customer was in a unfortunate predicament, in terms of their business process, when their very old GE Fanuc PLC system crashed on them. They decided to get the person who originally did all of their logic programming, but unfortunately this gentleman passed away several months prior, unbeknownst to them.  They were also using a Rice Lake 920i indicator, with 6 scales attached to it.  The indicator also had a custom program in it that we could not access due to needing a specific file, with a particular extension… which the deceased gentleman also had that we could no longer get.

As an answer to their predicament, their new IT person hired a firm out of Atlanta, GA to replace the system with a newer GE PLC system. This system required a different type of communication protocol that was being used before with the 920i and the GE Fanuc, and the B-TEK/Brechbuhler team stepped up and was able to come up with a solution; enter the Diade system!  We thought that some of their past issues with losing communications in the old system, software lockups, and incorrect weights might have had something to do with the fact they were pushing a total of (12) 350Ohm tank mount load cells, and (12) 360Ohm floor scale load cells, all with significant distances for homerun cables, and junction boxes for each one, with just the one 902i.  This left a lot for the old indicator to handle, so we decided to split the job up between two DD 1050i smart indicators.

The indicators had a custom program written to better incorporate them into their new PLC system.  We created a custom ASCII string that would transmit to an RTA module, via TCP/IP, which converted to MODBUS registers over TCP/IP. The program also had to have an adjustable millisecond output to the RTA module, due to the timing of the three different scales’ output being sent into the one string.  The RTA module was utilized on previous projects and was found to work very well in industrial environments; similar to what would be experienced at the manufacturing company.  These modules communicate directly to the DD 1050i on a specific port, and can be placed anywhere on the network, provided it is in the same SUBNET as the indicator.  This made their installation that much easier, because it didn’t need to be in close proximity to where the indicators had to be mounted.

After the software was developed to the customer’s specifications, the installation was completed and tested.  There were some issues with the timing of the data string to fit the MODBUS registers just right, but with the adjustable timing field in the setup, we overcame this fairly quickly!  Upon weighing a batch of product for the first time after installation, it was found that one of the tank mount scales was having issues.  We investigated and found out that the three existing hoppers were installed by a company from Texas, and had never been calibrated by Brechbuhler personnel.  These three happened to be attached to their new indicators.  After finding a problem with one of the hopper’s load cell mounts, repairing the bolt-hole pattern to reduce binding, and recalibrating with more weight, the customer was satisfied that the hopper was weighing great!

Phase 2:

The customer had been using an old MSI CellScale 9000 wireless weighing system, to transmit three of their portable floor scales’ weight to the old Fanuc PLC. We had previously been out several times to troubleshoot, then calibrate/repair as needed, and the process was tedious to say the least; it required a laptop communicating to the CellScale’s serial port, via Hyperterminal, and each individual “Channel” had to be calibrated this way.  The fact that the new PLC system didn’t have a serial port to communicate with these devices left them with zero system-wide weighing on these scales.  The customer asked us for a solution to this after the successful installation of the two DD 1050i indicators.

Since the current indicators acted as a “remote display” that read from a CellScale 9020, which received the A/D counts from the CellScale 9000, which transmitted over the proprietary wireless system, we wanted to minimize the failure points in the system by cutting out as much hardware as possible.  A solution was found in three DD 1010i indicators that were attached to Antaira APN-210N network bridges. Since it was an industrial application, we decided to place the APN-210N into a custom enclosure that better fit the environment. The existing Diade application was modified for one-scale-to-one-indicator, but all three ASCII strings were transmitted to a single RTA module.  It was discovered that this application would work better since each device’s string were separately going into the RTA module.  The system was tested and found to be working well with the customer’s new PLC system and custom weighing software.

The entire project addressed the customer’s many technical needs, from a MODBUS communication solution, to the portable weighing systems, we met and exceeded the customer’s expectations.  We have already been in talks with extending their usage of Diade indicators to their many individual reactors they’ve been purchasing as well, and look forward to a long and fortuitous business relationship between the customer, Brechbuhler/B-TEK Scales, and the Diade line of programmable indicators.

Posted by Tong Liu on May 12, 2016 No Comments

About: Tong Liu

Title: Systems Engineer

Located at the: Nitro branch

Connect with Tong Liu

Related Articles:

Brechbuhler Scales, Inc. Columbus, Ohio Installs Grain Management System

Brechbuhler Scales, Inc. Columbus, Ohio Installs cutting edge technology for a local customer.

Read More
Posted by Don Smith on January 14, 2016 No Comments

Brechbuhler Scales, Inc. Sarver, PA Installs Emery Winslow Scale

Emry Winslow

Brechbuhler Scales, Inc. Sarver, PA helps customer install exactly what he wanted.

Read More
Posted by Ashley Moore on December 8, 2015 No Comments

Brechbuhler Scales, Inc. Dayton Installs Custom Counting Application for Small Parts

Brechbuhler Scales, Inc. Dayton provides a DD 1010 Indicator with a custom counting application capable of communicating with a customer supplied database for counting small parts.

Read More
Posted by Justin Baker on January 11, 2016 No Comments

Brechbuhler Scales, Inc. Canton, OH branch install DD 2050

DD 2050 Salt Reserve

Two B-TEK DD 2050 unattended terminals were installed at a salt reserve with multi-directional traffic.

Read More
Posted by Ashley Moore on May 5, 2013 No Comments

Brechbuhler Scales, Inc. Cincinnati, OH Installs Heavy Duty Special

Working on a scale

Brechbuhler Scales, Inc. Cincinnati along with the help of many others throughout the company installed a one-of-a-kind B-TEK 45’x 28’ Heavy Duty Special Truck Scale.

Read More
Posted by Ashley Moore on September 8, 2013 No Comments

Brechbuhler Scales, Inc. Sarver, PA Sells Largest Livestock Scale Yet!


A partnership between a non-profit marketing network and a financial services group, had the cattle rancher in mind when they contacted Brechbuhler Scales, Sarver, PA branch for an oversized livestock scale.

Read More
Posted by Ashley Moore on June 2, 2013 No Comments

Brechbuhler Scales, Inc. Nitro Assists in a System Overhaul with Two DD 1050i’s

Brechbuhler Scales, Inc. solves the customers problems with two DD 1050i indicators when the current Indicator just couldn’t handle anything more.

Read More
Posted by Tong Liu on May 12, 2016 No Comments

Brechbuhler Scales, Inc. Nitro helps Recycling Company Overcome Unique Challenges

A recycling company had some unique challenges we had to overcome due to where they had to place the scale, which was a considerable distance from the sources of power and where the office would be.  First off, the indicator used was a DD 1010ic, with a custom truck in/out program, written to produce a […]

Read More
Posted by Tong Liu on February 23, 2016 No Comments

Brechbuhler Scales, Nitro Installs Unique Multi-Axle Weighing System

A multi-axle weighing system was installed by Brechbuhler Scales, Inc. Nitro. This unique system includes three separate weighbridges attached to a single indicator.

Read More
Posted by Tong Liu on January 14, 2016 No Comments

Outstanding Dealer Award

Brechbuhler Scales, Inc. has received The Outstanding Dealer Award.

Read More
Posted by Ashley Moore on January 25, 2016 No Comments

Fields marked with an * are required